Publicidad
Idiomas disponibles
Idiomas disponibles
Height Adjustment
for Head Support and Shoulder Harnesses
see images
-
17
19
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to
17
!
When used rear facing, the
shoulder harness height must be
even with child's shoulders.
!
When used forward facing, the
shoulder harness height must be
even with child's shoulders.
2. Lift up the head support
adjustment lever
18
, meanwhile
pull up or push down on the head
support until it snaps into one of
the 6 positions. The head support
positions are shown as
19
11
17
17
17
18
.
19
Using in the Rear Facing Mode
(Child height 40cm-105cm/Child weight 19.5kg/
infant - 4 years old)
see images
-
3
9
!
Please install the child restraint on
the rear vehicle seat, and then put
the child in the child restraint.
see images
-
20
29
1. Press the ISOFIX adjuster button
-1
and pull the base back from
20
the vehicle seat.
2. Press the rotating button to rotate
for easier side loading/unloading
of the child, then rotate back to
desired direction.
&
21
23
3. If a tighter install or increased
cabin space is required, then
press the ISOFIX adjuster button
-1
and push to adjust.
22
22
20
2
21
22
2
-2
1
1
12
Publicidad
