STERWINS EGT2-25.4 Manual Del Usuario página 171

Warning! to avoid danger of suffocation keep this plastic bag away from
babies and children!
2.3 SYMBOLS IN THIS MANUAL
Type and source of the
danger : Failure to observe this
warning may result in physical
injury or death.
Note : This symbol indicates
important information for
better understanding of the
product.
This product is recyclable. If
it cannot be used anymore,
please take it to waste
recycling centre.
Recycling code of paper.
x.xx
Please refer to the corresponding illustration at the end of the booklet.
2.4 WORK AREA SAFETY
A) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
B) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
2.5 ELECTRICAL SAFETY
A) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
B) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
C) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
Type and source of the danger:
This symbol indicates that
damage to the appliance, the
environment or other property
may occur as a result of non-
observance of this warning.
Read the manual: This symbol
indicates that you need to read
the user manual carefully.
Recycle this instruction
manual.
Guaranteed sound power level
(tested according to Directive
96 2000/14/EC as amended by
2005/88/EC).
C) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
D) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
E) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
F) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces the
risk of electric shock.
171
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN