GB
PRODUCT CHARACTERISTICS
This halogen oven is a product designed for heating, grilling and preparing meals which require heat treatment. The halogen
oven for thermal processing uses forced fl ow of hot air, which allows for homogenous heating of dishes. Thanks to a wide range
smooth temperature adjustment , you may adjust the product operating parameters to your own needs. Correct, reliable and safe
operation of the product depends on proper operation, therefore:
Before starting product operation, please read this manual and keep it.
The supplier does not assume any liability for any damages resulting from misuse of the product, failure to follow safety regu-
lations and recommendations specifi ed in this manual. Misuse of the product will also result in loss of guarantee and warranty
rights of the user.
EQUIPMENT
The product is delivered complete and does not require any assembly. Therefore, before using the product, it is required to remove
all packaging materials and protective elements for transportation. Some preparatory actions described in the further part of this
manual are also required. The product is supplied with two grates of diff erent height, a steel ring increasing the capacity of bowl,
a bread rack, an evaporator, a frying pan, a gripper and a bowl base.
GENERAL USE RECOMMENDATIONS
The product has been designed for home use and it is forbidden to use it in commercial applications, e.g. in catering facilities.
The product is used only for thermal processing of dishes directly placed inside the bowl. It is forbidden to use the product in a
diff erent way. The product is not used to heat and boil water or other liquids. The product is not intended for preparing meals by
deep frying. Do not put into the bowl any dishes in plastic containers.
Water can only be used for steam cooking and for cleaning the product. Both processes have been described later in this manual.
Unattended repair, disassembly or modifi cation of this product is forbidden. All product repairs must be carried out by an author-
ised repair point.
Product should be supervised all the time while operating.
WARNING! While operating, the product heats up to a high temperature, do not touch the bowl, lid and other components inside
the bowl during operation, and immediately afterwards, this poses a risk of serious burns.
This product is not intended for use by children below 8 years of age and persons with reduced physical or mental capabilities
and person with no experience or knowledge of the equipment. Unless they are supervised or trained how to use the product in a
safe manner so that the risks involved are understood. Children should not play with the product. Unattended children should not
perform cleaning and maintenance of the equipment.
Recommendations for the product transportation and installation
The product can be placed only on a hard, fl at, level and non-fl ammable surface resistant to high temperatures. Substrate should
withstand the weight of appliance itself together with food placed in it.
Provide at least 10 cm space around product's side walls, do not place any materials not resistant to high temperature above the
product. This will allow for proper product ventilation. Do not place the product near edges e.g. of a table.
Do not place the product near fl ammable materials, e.g. curtains or drapes.
The bowl should always be placed on the base. The base has handles to facilitate any movement of the bowl and ensures its
separation from the substrate. Placing the bowl directly on the substrate can lead to its damage and damages of the bowl due
to high temperatures.
Do not place any electrical appliances over the product. Water steam is released during operation of the product, which may cause
a short circuit of the electrical installation resulting in electric shock.
It is forbidden to drill any hole in the product, nor any other product modifi cation not described herein.
The product may be carried only when it cooled down by grabbing the handles of the base and cover. Do not move the product
by pulling the cord cord.
Temperature at the place of installation and use of product must stay within the range +10
C ÷ +38
C and the relative humidity
O
O
must be less than 90%, without steam condensation.
Recommendations for connecting the product to power supply
Before connecting the product to power supply, make sure that the voltage, frequency, and capacity of mains supply correspond
to values shown in the product rating plate. Plug must fi t into the socket. It is forbidden to modify the plug or socket in order to fi t
each other.
The product must be connected directly to a single power outlet. It is forbidden to use extension cords, socket-outlet adapters and
double power outlets. Power supply circuit must be fi tted with a protective conductor and at least 16 A protection circuit.
Avoid any contact of the power cord with sharp edges and hot objects and surfaces. When operating the product, the power cord
O R I G I N A L
I N S T R U C T I O N S
10