JVC KD-T922BT Manual De Instrucciones página 16

Getting Started
[F/W UPDATE]*2
[UPDATE SYSTEM]
[F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
[UPDATE DAB] (for KD-DB622BT/KD-X38MDBT)
[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
[F/W UP xxxxx]
activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK]
[ON]: The clock time is automatically set using the Clock Time (CT) data
[TIME SYNC]
in FM Radio Data System signal (for KD-T922BT) or DAB signal (for
KD-DB622BT/KD-X38MDBT). ; [OFF]: Cancels.
[CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned
off. ; [OFF]: Cancels.
8 ENGLISH
[ENGLISH]
[РУССКИЙ]
Select the display language for menu and music information if applicable.
[ESPANOL]
By default, [ENGLISH] is selected.
[FRANCAIS]
[DEUTSCH]*3
[ON]: Activates the display demonstration automatically if no operation is
[DEMO MODE]
done for about 15 seconds. ; [OFF]: Deactivates.
*1 Not displayed when the corresponding source is selected.
*2 Firmware downgrade is prohibited.
*3 Only for KD-T922BT.