Other Settings - JVC KD-T922BT Manual De Instrucciones

Digital Radio
(for KD-DB622BT/KD-X38MDBT)
Select a service
1
Press DAB to enter DAB search select mode.
2
Turn the volume knob to select [SRVC] (service list), then press the
knob.
3
Turn the volume knob to select a service, then press the knob.
To cancel, press and hold
Select a service by name
1
Press DAB to enter DAB search select mode.
2
Turn the volume knob to select [SRVC] (service list), then press the
knob.
3 Press 2 J / 1 K to select the character to be searched for.
4
Turn the volume knob to select a service, then press the knob.
To cancel, press and hold

Other settings

1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
10 ENGLISH
DAB.
DAB.
.
[TUNER SETTING]
[RADIO TIMER] (Except for KD-DB622BT)
Turns on the radio at a specific time regardless of the current source.
1 [ONCE]/[DAILY]/[WEEKLY]/[OFF]: Select how often the timer will be
turned on.
2 [FM]/[AM]/[DAB]: Select the source.
3 [01] to [18] (for FM)/[01] to [06] (for AM)/[01] to [18] (for DAB): Select
the preset station.
4 Set the activation day*and time.
"M" indicator lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM SRC] in [SOURCE SELECT] after Radio Timer for AM
is selected. (Page 7)
[AF SET] [ON]:
While listening to DAB...
Automatically switch to FM broadcasting the same program if the DAB signal
becomes weak. It will switch back to DAB sound when the signal becomes
strong again.
While listening to FM...
Automatically switch to DAB source broadcasting the same program (if
available). ;
[OFF]: Cancels.
* Selectable only when [ONCE] or [WEEKLY] is selected in step 1.
Default: [XX]