Troubleshooting - JVC KD-T922BT Manual De Instrucciones

Troubleshooting

Symptom
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
The unit does not work at all.
Correct characters are not • This unit can only display uppercase letters, numbers,
displayed.
• Depending on the display language you have selected
DAB reception is poor.
"CHK ANTENNA"
"RELATED SERV FOUND" • Press the volume knob to activate Soft-Link.
• Press
• Radio reception is poor.
• Static noise while listening
to the radio.
Remedy
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 7)
Reset the unit. (Page 4, 5, 6)
and a limited number of symbols.
(page 8), some characters may not be displayed
correctly.
Make sure [ON] is selected for [DAB ANT POWER].
(Page 11)
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT POWER] to [OFF].
(Page 11)
(Page 11)
to cancel.
Connect the antenna firmly.
Symptom
Disc cannot be ejected.
Noise is generated.
"IN DISC" appears and disc
cannot be ejected.
"PLEASE EJECT" appears.
Playback order is not as
intended.
Elapsed playing time is not
correct.
"NOT SUPPORT" appears and
track skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the device (USB/iPod/
"UNSUPPORTED DEVICE" • Check whether the connected USB device is compatible
appears.
• Reattach the USB device.
"UNRESPONSIVE DEVICE"
appears.
"USB HUB IS NOT
SUPPORTED" appears.
"CANNOT PLAY" appears.
Remedy
Press and hold to forcibly eject the disc. Be careful
not to drop the disc when it is ejected.
Skip to another track or change the disc.
Make sure nothing is blocking the loading slot when
you eject the disc.
Press , then insert the disc correctly.
The playback order is determined by the order in which
files were recorded (disc) or the file name (USB).
This depends on the recording process earlier
(disc/USB).
Check whether the track is a playable format.
(Page 34)
iPhone).
with this unit and ensure the file systems are in
supported formats. (Page 34)
Make sure the USB device is not malfunction and
reattach the USB device.
This unit cannot support a USB device connected via a
USB hub.
Connect a USB device that contains playable audio files.
ENGLISH 37