JVC KD-T922BT Manual De Instrucciones página 35

Audio Settings
[DTA SETTINGS]
For settings, see "Digital Time Alignment settings" on page 30.
[CAR SETTINGS]
[X ' OVER TYPE] Caution: Adjusts the volume before changing the [X ' OVER TYPE] to avoid
the sudden increase or decrease of the output level.
• Once you have changed the crossover type, the next time when you turn
on the power, the display shows:
"2-WAY X'OVER" or "3-WAY X'OVER"
"TO CONFIRM"
Press the volume knob to acknowledge in order to proceed to the next
desired operation.
[2-WAY] (Displayed only when [3-WAY] is selected.)
[YES]: Selects two way crossover type. ; [NO]: Cancels.
(Displayed only when [2-WAY] is selected.)
[3-WAY]
[YES]: Selects three way crossover type. ; [NO]: Cancels.
[SOUND EFFECT]
[SPACE ENHANCE] (Not applicable for FM/AM source and DAB source.)
[SMALL]/[MEDIUM]/[LARGE]: Virtually enhances the sound space. ;
[OFF]: Cancels.
[LEVEL1]/[LEVEL2]/[LEVEL3]: Virtually makes the sound more realistic. ;
[SND RESPONSE]
[OFF]: Cancels.
[SOUND LIFT] [LOW]/[MIDDLE]/[HIGH]: Virtually adjusts the sound position heard from
the speakers. ; [OFF]: Cancels.
[VOL LINK EQ] [ON]: Boosts the frequency to reduce the noise heard from outside the car
or running noise of the tyres. ; [OFF]: Cancels.
[K2 TECHNOLOGY] (Not applicable for FM/AM source, DAB source and AUX source.)
[ON]: Improves the sound quality of compressed music. ; [OFF]: Cancels.
*1 Displayed only when [SUBWOOFER SET] is set to [ON]. (Page 26)
*2 For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W].
*3 For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
[SUB.W/SUB.W].
*4 This adjustment will not affect the subwoofer output.
Speaker output settings
(Applicable only if [X ' OVER TYPE ] is set to [2-WAY])
Select the output setting for the speakers [SPK/PRE OUT], based on the speaker
connection method.
"PRESS" "VOLUME KNOB"
For connections through an external amplifier (Page 42, 43)
KD-T922BT/KD-X38MDBT:
Setting on
[SPK/PRE OUT]
[REAR/REAR] (default) Front speakers
[SUB.W/SUB.W]
KD-DB622BT:
Setting on
[SPK/PRE OUT]
[REAR/REAR]
[REAR/SUB.W] (default) Subwoofer output
[SUB.W/SUB.W]
[SPK/PRE OUT]
Connection via lineout terminals
Audio signal through lineout terminal
FRONT
output
Front speakers
output
Audio signal through lineout terminal
Rear speakers output
Subwoofer output
REAR SW
Rear speakers output Subwoofer output
L (left): Subwoofer output Subwoofer output
R (right): (Mute)
REAR/SW
ENGLISH 27