Publicidad
Idiomas disponibles
Idiomas disponibles
Generally a timer sets o with the countdown if the latter has been
programmed with values not equal to 0.
Example: the timer starts with release of
value "01".
The timer settings take priority over service time delimitations in the
presence of high cooking level settings.
TIME EXPIRY/TIMER ALARM AND CONFIRMATION
When the set time has expired, the timer alarm is triggered and any
assigned cooking area is switched o immediately. The cooking level
display indication "0" ashes in alternation with the symbol "H" in the
case of latent heat.
The 7-segment timer display indicates "00". The cooking zone timer Led
also ashes.
Timer alarms take priority.
If on expiry of the time the user should enter data, the current activation
of the keys will be used in order to con rm the alarm. The sound signal
is activated (beeper).
The alarm signal lasts at most one minute, if the user does not intervene
earlier. At the end of the minute or by pressing any key, the alarm signal
is suspended. Both the sound and visual signals of the timer are
deactivated.
If con rmation of the alarm takes place by pressing a key, the sound
signal is deactivated immediately and a key con rmation beep is
emitted. Depending on the moment of con rmation, the signal of
con rmation could coincide with the alarm sound signal. In the case of
alarm con rmation by means of pressing a key, the actual function of
the keys will not be carried out. To activate key function they must be
released and then reactivated.
Exception: ON/OFF key: in the case of alarm con rmation by means of
the ON/OFF key, the alarm signals will be deactivated 300 ms after
activation. If the key remains activated subsequently, the control will
switch to OFF mode after a total of 1s.
SWITCHING OFF THE TIMER / MODIFICATION OF TIMER SETTINGS
It is possible to change the setting of the timer, in WAIT or ACTIVE modes,
at any time after you have made the selection, by pressing the
key.
The timer can be switched o by taking it to the "00" value, pressing the
key or simultaneously pressing
Timers connected to the cooking areas are deactivated when the
cooking level in the assigned cooking area is taken to 0.
KEY LOCK LOCKING / ACTIVATION
Pressing the Key-Lock key in WAIT or ACTIVE mode locks the keyboard.
The Key-Lock warning light comes on in static mode. The time schedule
must be observed for activating the Key-Lock key. The control goes on
working in the previously set mode but cannot be controlled with key
other than the Key-Lock or ON/OFF key.
All the locked keys are not commanded by the control with regard to
continuous activation.
Switching o with the ON/OFF key is also possible in the locked state.
The Key-Lock function incl. the light remains active until it is deactivated
by pressing the Key-Lock key again. Activation/deactivation of the Key-
Lock function in OFF mode is not possible.
If programmed timers should be in function, the respective timer alarms
must be con rmed by depressing any key whatever, without having to
unlock the control previously.
If the key-lock is active, by pressing a key the word "lo" will appear until
the key-lock is deactivated.
key after having set timer
and
keys once.
KEY LOCK UNLOCKING / DEACTIVATION
The new activation of the Key-Lock key in the WAIT or ACTIVE mode
involves the unlocking of the keyboard and the switching o of the
assigned Key-Lock warning signal. All the sensor keys can be once more
activated.
OPERATING TIME LIMITATION
The touch control, if no commands are received, stops after a few hours
depending on the level set.
NOTE: in the case of level P after 10 minutes it passes to level 9 then the
time of level 9 is counted.
COOKING
LEVEL
0
0
1
10
2
5
3
5
4
4
5
3
6
2
7
2
8
2
9
1
P
1/6
or
– 11 –
OPERATING TIME H
EN
Publicidad
