Descargar Imprimir esta página

Franke FRSM 905 C TOD BK Manual De Instalación Y Servicio página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
OVERVIEW
CONTROL PANEL
13 14 17 11 12
9
15
16 5
1.
ON/OFF switch on switch o
2.
Cooking zone +
3.
Cooking zone –
4.
Double circuit activation
5.
Indepedent Led Timer (cannot be activated with other timers)
6.
Safety lock
7.
Double circuit selection Led
8.
Set value display
9.
Timer value display
10. Led safety lock inserted
CONTROLS
The cooking hob is controlled by an electronic microprocessor.
The control software detects both control and the presence of any
abnormal operating conditions, such as:
-
the spilling of liquids or presence of other objects on the
control panel;
-
the presence of condensate inside the hob.
In the event of any of the above conditons, the system sets to safety
alarm status: the powered on plates are immediately turned o and an
error code is displayed.
8
7
8
3
2
3
2
7
8
8
3
2
3
2
11. Right rear cooking zone Timer Led
12. Right front cooking zone Timer Led
13. Left front cooking zone Timer Led
14. Left rear cooking zone Timer Led
15. Timer -
16. Timer +
17. Central rear cooking zone Timer Led
18. Max power (10 minutes)
Standard operation is resumed once the cause of the alarm condition
has been removed. If operation is not restored, it may be necessary to
disconnect the mains power and reconnect it.
TOUCH KEYS
All operations can be performed using the touchkeys (capacitive
sensors) located on the front face of the control panel; each key
corresponds to a display.
Each activity is con rmed by a beep.
– 9 –
1. Cooktop
1
2. Control panel
2
7
8
10
18
3
2
6
EN
4
1

Publicidad

loading