Publicidad
Idiomas disponibles
Idiomas disponibles
30 MM
40 MM
Fig. 2
ELECTRICAL CONNECTION
Prior to carrying out the electrical connection, please ensure that:
-
the plant characteristics are such as to follow what is indicated on the
data plate placed at the bottom of the working area;
-
that the plant is tted with an e cient earth connection, following
the standards and law provisions in force. The earth connection is
compulsory in terms of the law.
Should there be no cable and/or plug on the equipment, use suitable
absorption material for the working temperature as well, as indicated on
the data plate.
If connecting directly to the mains power supply, t a multi-pole switch
of a suitable size for the rated capacity with a clearance distance which
completely disconnects the power line under overvoltage category III
conditions, consistently with the rules of installation (yellow/green earth
wire must not be interrupted).
The plug or omnipolar switch must be easily reached on the installed
equipment.
Under no circumstance must the cable reach a temperature above 50 °C
of the ambient temperature.
NOTE: Make sure the characteristics of your household electrical power
supply (voltage, maximum output and current) are compatible with
those of your FRANKE hob.
600
55
.
MIN
150
150
.
.
MIN
MIN
400V 3N~
1
L1 L2 L3
400V 2N~
1
L1 L2
230V~
1
Fig. 3 Considering contemporaneity factor
– 8 –
H05RR--F5x1.5
2
4
3
5
N
H05RR--F4x1.5
2
4
3
5
N
* H05RR--F3x2.5
2
4
3
5
L
N
Publicidad
