Publicidad
Idiomas disponibles
Idiomas disponibles
EN
9 Folding and Carrying
2
1
Safety Button
Folding
Lift up the safety button and open
Locking and carrying
the quick release lever. Then fold
Align the snap hook and the
the stem.
buckle and attach the snap
hook to the buckle.
Valve Stem Extension
Carrying
When your KickScooter is folded
Unscrew the valve cap.
Connect the valve stem extension
up, lift it by the stem to carry.
to the tire valve stem.
14
Snap hook
Unfolding
Disengage the snap hook from
the buckle. Fold the handlebar
stem up, close the quick release
lever.
Valve Cap
Connect the pump to
inflate the tire.
10 Maintenance
Daily Maintenance
● Make sure there are no loose fasteners and damaged parts.
● Check the status of the battery level, lighting, dashboard display, etc. and make sure they work normally.
● Check whether the front and rear brakes can work normally. Make sure the brakes function properly.
● Make sure the handlebar is stable, the steering system is correctly adjusted, and the front and rear wheels are not shaky or
loose.
● Make sure the reflectors are not damaged or dirty.
● Make sure the folding system is correctly tightened and not broken.
Caution
● If you need to repair or replace components or wear parts, please obtain a list of authorized service centers at
www.segway.com. If you have any questions, please visit the after-sales service available at www.segway.com.
● Be sure the KickScooter is powered off before performing any maintenance or when installing or replacing parts.
● When installing components, use proper and sufficient force until the component is secure. If the installation is too loose or
too tight, the KickScooter may not function properly resulting in potential injuries to you or others or damage to, or
malfunction of, the KickScooter.
● Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism and brakes.
Modifications to your KickScooter could interfere with the operation and performance of the KickScooter, which may result
in serious injury and/or damage, and could void the Limited Warranty. Only use Ninebot or Segway approved parts and
accessories.
Cleaning and storage
Use a soft, wet cloth to wipe the main frame clean. Dirt that is difficult to remove can be scrubbed with a toothbrush and
toothpaste, then cleaned with a soft, wet cloth.
NOTE
Do not wash your KickScooter with alcohol, petrol, acetone or other corrosive/volatile solvents. These substances may
damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer
or hose.
WARNING
Make sure the KickScooter is powered OFF, the power cord is unplugged and the rubber cap on the charge port is tightly
sealed before cleaning; otherwise you may damage the electronic components.
Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight
and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may
reduce battery life.
EN
15
Publicidad
