TECNO-GAZ
Maintenance
Control keyboard
Accessory manual
intensity.
In the lower part are indicated: the colour temperature (4), the selected
diameter (5) the state of the Endoled function (6).
3
4
In the event of the Product not responding to the controls, make the
following checks:
Make sure the remote control is pointing towards the IR receiver placed
-
in the central hub of the structure;
Make sure the batteries are charged. To replace them, open the rear
-
door by loosening the screws and replace them with new type AA ones.
4.2 Universal remote control
A universal remote control is available which controls the lamp and camera
MA_001
01/09/15
Rev.0
Pag. 16 di 24
5
EN
2
6