Publicidad
Idiomas disponibles
Idiomas disponibles
TECNO-GAZ
VA arm
WA1 arm
WA2 arm
Accessory manual
the required position.
The swinging movement downwards cannot be changed.
After making adjustments, return the covering (1) to its original position.
The possibility also exists of selecting the stop position of the horizontal
arm. To do this, select the stop position corresponding to one of the 5 slot
screws (5) and remove the screw (5). Remove the hexagon socket head
retention screw (6) and insert it in the position of the previously-removed
screw. Insert the slot screw (5) in the position of the removed retention
screw. It is possible to choose between 6 different stop positions.
1.6 Monitor and maximum weight
MA_001
Rev.0
Pag. 7 di 24
The VA arm is designed to sustain a 15" to
24" monitor, with a weight that can vary
between 2 and 10 kg
The WA1 arm is designed to sustain a 15"
to 32" monitor, with a weight that can vary
between 4 kg and 20 kg
The WA2 arm is designed to sustain two
15" to 24" monitors, with a weight varying
between 2 and 16 kg altogether
01/09/15
EN
Publicidad
