Publicidad
Idiomas disponibles
Idiomas disponibles
3.4 SevenGo™ clip
The SevenGo™ clip is an electrode holder that can be placed next to the display on either side of the housing.
1 To mount the clip, remove the cover over the clip's fixing point using your thumbnail.
2 Attach the clip by pressing it into the recess.
3 Slide the shaft of the sensor into the clip from the top.
4 Rotate the sensor around the clip's axis to switch between the storage and working positions.
3.5 SevenGo™ two-electrode clip
The SevenGo™ two-electrode clip is the ideal accessory for handling two electrodes in the field. Two electrode
clips can be connected.
Attach the two clips by pressing them into the recesses of the clip connector.
SevenGo Duo pro™
Installation 7
Publicidad
