Camp4 916883 Manual Del Usuario página 13

Idiomas disponibles

CAMP4 l Trolley Gas Grill | 916883/916884

• Danger "Gas displaces oxygen"

Liquid gas is heavier than oxygen. Therefore it settles on the ground and displaces the oxygen at the

level.

Possible consequences:

• Suffocation resulting from a lack of oxygen if the gas concentration is allowed to rise sufficiently.

Safety measures:

• Only use the barbecue outdoors in a well ventilated area and above ground (i.e. not in areas that

are below ground level).

• Close the valve on the gas cylinder after each use.

• Never leave the barbecue unattended. If the flame extinguished, relight immediately or cut off the

gas supply.

• Before each use, make sure that all gas connections are sealed and intact.

If necessary, replace the hose in order to comply with the corresponding national requirements.

The barbecue must not be used if the connection for the gas supply are porous or faulty.

• If the barbecue is not being used for a prolonged period, cut off the gas supply and store properly:

- Fit the gas cylinder valve with a cap nut and safety cap-

- Do not store the gas cylinder in rooms below ground level, in or near stairways, hallways or

passages and thoroughfares between buildings.

- Always store gas cylinder upright, even if they are empty.

• The parts sealed by the manufacturer or his agent must not be altered by the user.

6. ASSEMBLY

Before starting

Here are a few tips to help you assemble your barbecue quickly and successfully:

• Check that no parts are missing by placing all of the individual parts on an empty surface.

If, despite careful factory checks, a component is missing, please contact our customer service department (see the last

page). We will immediately attend to your request.

• Sort out the small parts, as some of the screws and bolts, for example, are very similar and can be easily confused.

• For assembly you will need a medium size screwdriver and a suitable spanner (flat spanner or box spanner).

You will need a flat spanner to connect the gas cylinder.

Only use tools that are intact and suitable for the job at hand. Worn or unsuitable tools will not allow you to tighten the bolts

sufficiently, but will damage them to the extent that they can no longer be turned.

• Always fit all connecting elements (screws, bolts, nuts, etc.) as shown in the following illustrations. If you misplace a connect-

ing element, replace this with an appropriate part. Only by doing this can you ensure that the construction is strong and safe.

• It is essential that you follow the instructions in the order they are specified!

• Read the text for each step before carrying it out, as useful information is sometimes only provided at the end of the section.

ASSEMBLY PROCEDURE please look at pages 74 - 78

916884