Descargar Imprimir esta página

Kärcher IVM 60/36-3 H Manual Del Usuario página 21

Ocultar thumbs Ver también para IVM 60/36-3 H:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71
Symbols on the device
The device is suitable for vacuuming dusts
up to dust class H.
WARNING: This device contains dusts that
are harmful to your health. Emptying and
maintenance, including removal of the dust
bag, may only be performed by appropri-
ately trained personnel wearing suitable
personal protective equipment. Do not
switch on until the entire filter system has
been installed and the volume flow control
functionality has been checked.
Note
If necessary, remove the sticker in the rele-
vant national language from the enclosed
sheet of stickers and stick it onto the unit
over the German text.
The maximum vacuum value in relation to
the hose cross-section is specified on the
label. The actual value can be read on the
pressure gauge. For the values applicable
to this device, see chapter Reading the
minimum volumetric flow. If this value is not
reached, the filter must be cleaned (see
chapter Dedusting the main filter) or re-
placed (see chapter Replacing the main fil-
ter). The various different hose cross-
sections allow adaptation to the various dif-
ferent connection cross-sections of the ac-
cessories.
Dust bag
(Order no. 9.989-606.0)
Safety filter bag
(Order no. 6.904-420.0)
Main filter
(Order no. 9.990-292.0)
H14 filter
(Order no. 9.993-006.0)
Initial startup
WARNING
Danger from dust that is harmful to your
health
Respiratory sicknesses through inhalation
of dust.
Do not vacuum without correctly installed
filter elements, otherwise a danger to
health from increased fine dust emission is
present.
ATTENTION
Missing filter element
Damage to the suction motor
Do not vacuum without a filter element.
1. Bring the device into the working posi-
tion.
2. Secure the device with the parking
brakes.
3. Ensure that the suction head is fitted
correctly.
4. Insert the suction hose (not included in
the scope of delivery) into the selected
suction connection (see chapter Select-
ing the suction connection).
5. Seal the other suction hose port tightly
with the sealing plug (see chapter Clos-
ing the suction connection).
6. Check the filling level in the dirt recepta-
cle (see chapter Check the dirt recepta-
cle filling level).
7. Empty the dirt receptacle if necessary
(see chapter Emptying the dirt recepta-
cle).
8. Depending on the application, insert the
dust bag or the safety filter bag before
dry vacuuming (see chapter Dry vacu-
uming)
English
21

Publicidad

loading