Mettler Toledo VFS120 Manual De Instrucciones página 12

3.4
3.5
12
Confirm that the scale is stable
3.4.1 Stop the forklift for 1-2seconds until the scale is stable and the dynamic
symbol (~) has disappeared from the terminal's screen.
3.4.2 It is not recommended to weigh when the forklift is in motion.
3.4.3 It is not recommended to weigh while lifting the mast.
3.4.4 Check if the angle is within range.
Compensation range: Pitch ±5°, roll ±3°. If the angle is out of range, a
message will be displayed on the terminal screen. In such cases, the mast
should be adjusted, or the forklift moved onto even ground.
Data Printing
Depending on the operational requirements, you can:
• Press the print button to print it out if the weighing terminal is connected with
a printer.
• Or, press the print button to transmit the weighing data to the host if the
terminal is connected with a host.