Mettler Toledo VFS120 Manual De Instrucciones página 24

24
4.9.2.2 Reviewing Average Piece Weight
When the counting mode is active, press and hold the counting
function key to display the current APW (Average piece weight).
The APW symbol
and the APW value - in Figure 5-7, the value is 0.015 kg.
Press the counting function key again to display the reference
number Figure 5-8- here, 100 pieces is the current selection.
Each time the "counting" key is pressed, the display switches
between APW and reference number. Press
review screens.
4.9.2.3 Unit switch in counting mode
When the counting application is active, the unit switch has a
special function unlike its standard operation. Press the "Unit
Switch" key to cycle the display through PCS, primary unit and
second unit in turn.
4.9.3 Accumulation
The IND236 terminal provides grand total (GT) registers and counters.
Counters have a limit of 999 and registers will accumulate up to 7
digits of weight, including any digits to the right of the decimal point.
For example, a scale programmed for 1500x1kg will accumulate
weight values up to 9999999 (7 total digits). If either of these limits
is exceeded, an error message "—no—" will display and the totals
must be reset before additional weights or counts are added.
will appear in the top row of the display,
Figure 5-7: APW Review Screen
Figure 5-8: Reference Number Review Screen
to exit the