Kärcher K 3 Follow Me Manual Del Usuario página 17

Assembly
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 2
Illustration
 Insert the transport wheels and lock
them.
Illustration
 Insert the steering rollers and lock
them.
Illustration
 Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
 Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
 Check the secure connection by pulling
on the high pressure hose.
Start up
 Park the appliance on an even surface.
 Connect the high pressure hose to the
high pressure connection of the appli-
ance.
 Completely uncoil the mains cable.
 Insert the mains plug into the socket.
Water supply
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
 Attach the water supply hose to the
coupling on the water connection.
 Connect the water supply hose to the
water supply.
 Completely open the water tap.
English 17