Franke FSAS A90 BK/XS Manual De Uso página 13

T4 Short
Long press with
light on
Long press with
all loads off (mo-
tor and lights)
T5 Short
Long press with
all loads off (mo-
tor and lights)
Recommended device coupling sequence:
1 - Connected Mode (See remote control manual)
2 - Connected Mode Coupling (See hood manual)
3 - Remote Control-Hood Coupling (See remote control manual)
5. FRANKE@HOME APP
The Franke@Home App is available for
iOS and Android smartphones and al-
lows remote access to all hood func-
tions.
AUTO Mode
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever any other keys are pressed.
Thanks to the presence of the Air Quality Sensor, an algorithm is
able to modulate the speeds based on the quality level of the intake
air.
WARNING: The algorithm function is optimised for the most common
types of cooking. Uncommon preparations may produce a non-optim-
ised response.
Induction/Gas Cooktop Selection
Select the type of cooktop in use, either Induction or Gas.
The Induction Cooktop is set by default.
Connected Mode Coupling
Before starting the procedure follow the specific instructions of the
manuals of the devices to be coupled.
The procedure for pairing of the hood with devices compatible with
the Connected Mode (remote control) starts. Only one remote control
can be paired. See the manual of the devices for details of the opera-
tions that need to be performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised
within this time check that you have previously activated the proced-
ure for the devices to be coupled. The maximum number of linkable
devices may have been reached.
The lights alternate between high intensity, medium intensity (if
present), off.
Wi-Fi configuration
Activates/Deactivates the Wi-Fi set-up procedure.
Before starting the procedure, use the Franke@Home App to re-
gister with the Franke IOT system. Then follow the instructions to add
a new device and register the domestic router.
If the procedure is not successfully completed within a few minutes,
deactivate it by long pressing the key again, then make another at-
tempt. The hood will nonetheless abandon the procedure if it is not
successfully completed within 15 minutes.
Icon Function
Fixed light:
AUTO mode activated.
Off:
AUTO mode temporarily
deactivated.
1 Flashing T1: confirms
the Induction Cooktop
selection.
2 Flashing T1: confirms
the Gas Cooktop selec-
tion.
LEDs T1 and T2 flash-
ing:
coupling in progress.
Upon successful com-
pletion of the procedure
LEDs T1 and T2 will
light up for 2 seconds.
-
LEDs T4 and T5 flash-
ing: configuration pro-
cedure in progress.
Upon successful com-
pletion of the procedure
LEDs T4 and T5 will
light up for 2 seconds.
13