TOPDON PHOENIX ADAS MOBILE PX1000 Manual Del Usuario página 29

2.3 General Calibration Operations for LDW System
2.3.1 Precondition for the Use of the PHOENIX ADAS MOBILE
Regard the following in order to use the PHOENIX ADAS MOBILE:
• Vehicle system is working properly.
• No trouble codes stored in ECU memories.
• Prepare calibration reference pattern.
• A diagnostic tool supporting ADAS system calibrating is required (sold separately).
• Front & rear axle track is properly adjusted.
• To calibrate accurately, please make sure the following workstation requirements are met (See Chapter
2.4.1.1 ~ Chapter 2.4.1.3).
2.3.1.1 Workstation size
A. For front cameras
Distance A = the width of the cross member
Distance B = about 1m / 39.4inch (from the cross member to the wall)
Distance C = at least 0.5m / 19.7inch (from the edge of the cross member to other obstacles)
Distance D = varies from vehicle to vehicle, about 1.5m / 59inch is strongly recommended (from the
calibration panel to the vehicle)
Distance E = reserved for about 1m / 39.4inch (from the vehicle to other obstacles)
Distance F = at least 0.5m / 19.7inch (a lane for technician to walk through)
27
www.topdon.com