Publicidad
Idiomas disponibles
Idiomas disponibles
crossbar is parallel to the vehicle.
2.
Turn off the cross laser instrument LAM09-02 and detach it from the center positioning plate.
3.
Step the parking safety mechanism (12) down to fix the calibration frame to prevent it from moving.
2.3.2.5 Select the desired target / pattern board
1. According to the vehicle being serviced, choose the corresponding target /pattern board.
2.
For pattern board (larger), follow the steps below to install it.
1). Pull the center positioning plate outwards and rotate it until it vertically stands on the calibration
frame.
2). Locate the mounting holes on the calibration pattern board. Please note that there are two preset
installation holes on the center of the bottom of each big pattern board.
www.topdon.com
33
Publicidad
