Ivoclar Vivadent Programat P710 G2 Instrucciones Breves página 8

3. User interface
The Programat P710 G2 has a wide-screen colour display. The keypad and
the touch screen allow user-friendly handling. By tapping slightly with your
fi ngertips on the touch screen, the buttons are activated and the furnace
performs the requested function.
Keypad:
Home
Returning to Home screen (main menu)
Power-saving key
This key activates the power-saving function.
Open furnace head
Close furnace head
START (Start LED)
Starts the selected program. The green LED indicates that a
program is running. If the program is paused (1 x STOP), the
Start LED fl ashes until renewed pressing of START results in the
program being resumed.
STOP
A running program can be paused by pressing the STOP key and
terminated by pressing the key twice. Movement of the furnace
head can be stopped at any time by pressing STOP. Acoustic
signals can be turned off by pressing the STOP key.
8
Program key
Pressing once: The currently selected program is
displayed.
Pressing twice: The program selection via number entry is
accessed.
IRT key
With this key, the infrared image of the object can be
displayed during the closing process.
Digital Shade Assistant key
With this key, the Digital Shade Assistant (DSA) can be
started and closed.
Phone key
– If the furnace is not yet connected to a mobile phone,
pressing this key results in the Bluetooth settings being
displayed.
– If the furnace is already connected to a mobile phone,
pressing this key results in the mobile phone menu being
displayed.
– During an active phone call, this key can be used to fade
the mobile phone screen in or out.