Publicidad
Idiomas disponibles
Idiomas disponibles
1. Verify that the power cord is
disconnected from the outlet.
2. In order to prepare your vacuum for
dry vacuuming, make sure the reusable
cloth filter completely covers the filter
cage against the powerhead. Your wet/
dry vacuum comes with the reusable
cloth filter pre-installed. For installation
instructions, see page 18.
3. Optional: For improved dust filtering,
fit dust bag flange onto the inlet port,
taking care not to damage the bag. Dust
bag sold separately.
4. Place the powerhead back on the
collection tank and secure it in place
using the latches.
DRY VACUUMING OPERATION
5. Insert the larger end of the hose onto the
vacuum port.
6. Choose the desired accessory and insert
onto the end of the hose or extension
wand.
7. Verify that the switch is in the 'O' OFF
position before plugging the power cord
into the outlet. Plug the power cord into
the outlet.
8. Turn the motor on by flipping the
switch to the 'I' ON position and begin
vacuuming.
- 13 -
Publicidad
