Publicidad
Idiomas disponibles
Idiomas disponibles
Review this table to find do-it-yourself solutions for minor performance problems. Any
service needed, other than maintenance described in this Use & Care Guide, should be
performed by a qualified service agent.
WARNING
Always turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrical shock or personal injury.
PROBLEM
No power supply.
The wet/dry
Faulty power cord.
vacuum will not
operate.
Collection tank is full.
Switch in the wrong position.
The reusable cloth filter is missing
The dust comes
or damaged.
out from the
motor cover.
Incorrect use of foam filter when
dry vacuuming.
There are blockages in the nozzle,
Reduced
or hose, or the collection tank
efficiency and
inlet.
motor/speed
The reusable cloth filter is clogged
vibration.
by dry dust.
TROUBLESHOOTING
POSSIBLE CAUSE
Check the power supply, cord, breakers, and
fuses.
Unplug and check the power cord. If
damaged, have it repaired by a professional.
Empty the collection tank.
Press the ON 'I' button on the powerhead.
Attach or replace the reusable cloth filter.
Replace the foam wet filter with the reusable
cloth filter.
Unplug and check nozzle, hose, and collection
tank inlets for blockages.
Take off the filter and clean it or install a new
reusable cloth filter.
- 20 -
SOLUTION
Publicidad
