Cleaning And Disinfecting - Dräger X-plore 2100 Instrucciones De Uso

4.2

Cleaning and disinfecting

Clean and disinfect the half mask after every use.
WARNING
!
The mask body must be cleaned thoroughly so that no
residues from skin care products remain on it. Otherwise the
elasticity in the sealing area can be lost, and the mask will no
longer fit correctly.
If this warning is not heeded, poisoning or death can result..
CAUTION
!
Danger of material damage!
Do not use any solvents (e.g. acetone, alcohol) or cleaning
agents containing abrasive particles for cleaning and
disinfecting. Only use the prescribed process and use the
cleaning and disinfection agents given. Other agents, dosages
and contact times may damage the product.
NOTICE
i
i
Silicone is prone to absorb cleaning agents and disinfectants.
In case of repeated cleaning or disinfection the agents can
accumulate in the silicone. This may result in skin irritations
when wearing the mask. Therefore strictly follow the cleaning
and disinfecting procedure. Thoroughly rinse each part for at
least 10 minutes under running water.
For
disinfectants and their specifications, see document 9100081
at www.draeger.com/IFU.
X-plore 2100
information on suitable cleaning
Maintenance
products and
23