Publicidad
Idiomas disponibles
Idiomas disponibles
2-1-2 Temperature setting
Press
or
to set the target temperature directly – the temperature will start to
blink.
Press
or
to set the target temperature.
Temperature range is from 10-35 C.
If no buttons are pressed, the blinking will stop after five seconds and the settings will
be chosen automatically.
2-1-3 Timer setting (timer mode)
Hold
for three seconds until the
and start to blink.
This means the timer setting starts as follows:
Press
or
to change the timer by 30 minutes. The maximum is 24 hours.
When the time is up, the unit will enter standby mode
You can also set time and temperature the same as 2-1-1 and 2-1-2.
To leave the timer mode: hold the
disappeared.
The unit will automatically return to the normal mode.
(Note: When exiting and returning to free programme, the unit will enter normal mode
first. The original timing will be cancelled automatically).
2-2 Selecting running mode
Press
to select a programme (Programme No. will blink).
Press
or
to select a mode:
Then press
to confirm.
Note: If no buttons are pressed during this period, a mode will be selected automatically
after five seconds.
2-3 Day programme
Day programme has three modes:
Comfort: (
and programme content displayed as ). Choose between 10-35 C.
Economic mode: (
The temperature should be no higher than the comfort temperature.
Anti-frost mode: (
If a daily programme was chosen for the work programme, it will be repeated every day.
o
. symbol is shown. The clock will turn to 00:00
for three seconds until the
and programme content displayed as ). Choose between 10-35 C.
). The temperature is fixed at 7 C.
.
o
33
symbol has
o
o
Publicidad
