Note: When pressing
4 Other notes
1. he screen has a backlight, which turns off after one minute if no buttons are
pressed. It will light back up when any button is pressed.
2. The unit has an automatic button-lock function. The buttons will lock (
open lock: press
3. If you unplug the unit or there is a power cut, the time will reset to 00:00.
4. This heater includes an overheat protection system that shuts off the heater when
parts get excessively hot.
5.
will only show when the unit is heating.
6. When turned on from standby, the unit always enters free use mode.
7. When turned on, the unit will start on the last mode set.
to power on, the unit will begin with factory settings.
and
at same time.
37
) .To