Publicidad
Idiomas disponibles
Idiomas disponibles
CORDLESS SCREWDRIVER
PAS 4 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety in-
structions. Use the product only as described and for
the range of applications specified. Please also pass
these operating instructions on to any future owner.
Intended use
This appliance is designed for screwing into wood,
plastic and metal. The cutting attachment is designed
exclusively for cutting soft materials, such as card and
similar materials up to a thickness of 6 mm. Use this
product only as described and for the areas of ap-
plications specified. The appliance is not intended for
commercial use. Any other usage or modification of
the appliance is deemed to be improper and carries a
significant risk of accidents. The manufacturer accepts
no responsibility for damage(s) attributable to misuse.
Features
Rotation direction switch/safety lock-out
Motor direction indicator for clockwise rotation
Battery charge level indicator
Motor direction indicator for anticlockwise
rotation
Charging socket (appliance)
ON/OFF switch
LED lamps
Tool holder
Charger
Torque attachment
Lock button
Eccentric attachment
Angle attachment
Cutting attachment
Bits and bit extension
■
38
│ GB│MT
Package contents
1 cordless screwdriver PAS 4 A1
1 charger PAS 4 A1-1
1 carrying tool bag
26 bits x 25 mm
2 bits x 50 mm
1 bit extension
1 torque attachment
1 eccentric attachment
1 angle attachment
1 cutting attachment
1 set of operating instructions
Technical data
Cordless screwdriver: PAS 4 A1
Nominal voltage:
Battery (integrated):
Battery capacity:
Rated idle speed:
Torque:
Tool holder:
Use only the following charger to charge the
cordless tool:
PAS 4 A1-1:
INPUT:
Rated voltage:
Rated current:
Polarity:
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
4 V
(DC)
(1 cell)
1500 mAh
n
200 rpm
0
max. 4.0 Nm
6.35 mm (¼")
100–240 V ∼ 50/60 Hz
(AC)
max. 0.5 A
positive
5.5 V
(DC)
1700 mA
approx. 1 hr
II /
(double insulation)
PAS 4 A1
Publicidad
