Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Mounting the fascia doors
• Ensure that there is a gap of 3 to 4mm between the non-
hinged side and the cabinet wall.
• Locate the slider in the bracket and fix the slider to the
fascia door 20 to 22mm from the edge of the fascia
as shown in following pic., ensuring that the slider is
positioned centrally and horizontally within the bracket.
Tighten securely by hand.
• Fill the gap on the non-hinged side with the gasket/seal
strip provided.
• The finished look for the door sliders should be similar
to those shown in following pic., which shows 2 sliders
inplace.
Ensure the appliance doors open, close and seal properly.
Once complete, and if you are happy with the fit of the
appliance in the cabinet, bend and snap the parts of the
white spacers marked 'S' as shown by the dotted outline.
Leave the rest of the spacer cover in place over the metal
plates.
Gasket
14
IMPORTANT
After completing the installation, check that the appliance is
secured within the unit and that the door(s) close and open
properly. Ifthere is no resistance from the door seals when
opening the doors, then it is probable that the appliance
and/or decor doors are not fitted properly.
Decor door
Publicidad
