Heating
function
Pizza Function
Moist Fan Bak‐
ing
Defrost
8. CLOCK FUNCTIONS
8.1 Clock functions table
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
Application
To bake pizza. To make in‐
tensive browning and a crispy
bottom.
This function is designed to
save energy during cooking.
When you use this function,
the temperature in the cavity
may differ from the set tem‐
perature. The residual heat is
used. The heating power may
be reduced. For more infor‐
mation refer to "Daily Use"
chapter, Notes on: Moist Fan
Baking.
To defrost food (vegetables
and fruit). The defrosting time
depends on the amount and
size of the frozen food.
Application
To show or change the time of day. You can change the time of
day only when the oven is off.
To set the length of cooking. Use only when a heating function is
set.
To set the oven turn-off time. Use only when a heating function is
set.
Combination of functions: Duration, End Time.
To set a countdown time. This function has no effect on the opera‐
tion of the oven.
Minute Minder - can be set at any time, also if the oven is off.
Heating
function
Pyrolysis
7.4 Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements according to EU 65/2014 and
EU 66/2014. Tests according to EN 60350-1.
The oven door should be closed during
cooking so that the function is not interrupted
and the oven operates with the highest
energy efficiency possible.
When you use this function the lamp
automatically turns off after 30 sec.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
Saving.
Application
To turn on the pyrolytic clean‐
ing of the oven.
ENGLISH
11