Publicidad
Idiomas disponibles
Idiomas disponibles
FIG. 4
6. Attach the Left and Right L Tubes (#5 and #6) to the Left and Right Tubes (#3 and #4) using Bolts (#26), Washers
(#22)and Nuts (#27), and then attach the Left and Right L Tubes (#5 and #6) to the Mounting Tubes (#8) using Bolts
(#26), Washers (#22) and Nuts (#27) as shown in FIG.4A & 4B.
7. Attach the Support Tubes (#7) to the Board Tube (#2) using Bolts (#24), Washers (#22) and Nuts (#27) as shown in
FIG.4C, repeat this step for other side. Note: Make sure the spring lock is face down.
FIG. 4
8
8
FIG. 4B
27
22
FIG. 5
8. Attach the Horizontal Tube (#12) to the Board Tubes (#2) using
Bolts (#24), Washers (#22) and Nuts (#27) as shown in FIG.5.
And then insert the Board L Tubes (#1) to the Board Tubes (#2) as
shown in FIG.5.
7
2
7
7
3
5
5
6
6
26
2
24
22
12
27
FIG. 4C
27
4
27
5
22
24
22
26
FIG. 4A
FIG. 5
1
12
2
Publicidad
