MD SPORTS 57001 Instrucciones De Armado página 8

FIG. 8
11. Tear off the paper from in front of Electronic Scorer (#14) and stick it to the Backboard (#21). then using four
Screws (#31) as shown in FIG.8.
FIG. 8
FIG. 9
12. Attach the Rim (#17) to the Backboard (#21) using four Bolts (#23) and four Washers (#22), attach the Rim
Support Plate (#18) to the back of backboard using four Nuts (#27) as shown in FIG.9.
13. Attach the Switch Sensor (#15) to the Backboard (#21) using four Bolts (#23), eight Washers (#22) and four
Nuts (#27) as shown in FIG. 9.
14. Connect the wire of the Switch Sensor (#15) to the Electronic Scorer (#14) as shown in FIG.9A.
FIG. 9
17
23
22
23
21
14
21
14
15
22
14
31
27
18
22
7
FIG. 9A
14