Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance and storage
1. Keep the machine, accessories and all equipment in safe working condition.
2. Periodically check that the cutting, engine mounting and other screws are in good condition and ensure that
the machine is in safe working condition.
3. Cool the machine before storing it indoors and keep it away from any source of fire.
4. If the machine is to be stored for a long period of time, read the specifications.
5. Do not repair the machine arbitrarily, unless you have knowledge, suitable tools, instructions for
disassembling, assembling and repairing the machine or have been trained to do so.
Other maintaining advices
1 Cool down the machine before maintaining, storing and transporting.
2 Don't clean up air filter and muffler of gasoline engine with water, because it may flow into the inner part of
the machine and damage it.
3 Forbid from using fuel oil that is dirty, contaminated, watering and wrong, which could damage he gasoline
engine badly.
4 Forbid from using lubricating oil that is dirty, contaminated, watering and wrong, which could damage he
gasoline engine badly.
5 Don't tilt gasoline engine in the process of maintenance, storage and transport.
6 Please pull out spark plug in the process of maintenance, storage and transport.
7 Turn off the switch of fuel oil so as to avoid the possibility of the leakage of fuel oil and lubricating oil when in
transport.
8 If should be stored in a long time, always keep the specification as an important material.
9 Machine should be stored in ventilated, dry and safe place, and being kept away from fire source.
10 Machine should be cleaned up from dirtiness and weeds after in service.
Publicidad
