Publicidad
Idiomas disponibles
Idiomas disponibles
6
Start cleaning. RoboVac will automatically vacuum and mop.
7
When RoboVac finishes cleaning and returns to the Charging Base, remove the
mopping module.
8
Press the release button to remove the dust box and the water tank.
9
Clean the dust box and water tank, empty any remaining water, and clean the
mopping cloth to prevent mildew or unpleasant smells. For how to clean and
maintain the components, refer to the "Cleaning and Maintenance" section in this
manual.
Use Your RoboVac with Amazon Alexa / the Google
Assistant
Amazon Alexa or the Google Assistant is a smart voice control device that enables
you to control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the Charging Base to ensure there is enough power.
• RoboVac is connected with the EufyHome app.
• You have an Amazon Alexa-enabled device (i.e. Amazon Echo, Echo Dot and
Amazon Tap, Echo Show, Echo Spot) or a device enabled with the Google Assistant
(i.e. Google Home, Google Home Mini). These devices are sold separately.
• The Amazon Alexa app or Google Home app is already installed on your smart
device, and you have created an account.
24 EN
To control RoboVac with Amazon Alexa or the Google
Assistant
1. Open the EufyHome app and find "Smart Integrations" in the top left.
2. Follow the on-screen instructions to complete the setup.
• Currently, this feature only supports English, German, French, and
Spanish. For more supported languages, check https://www.eufylife.com/
support/.
Enable / Disable the Child Safety Lock
Press and hold the
button for 3 seconds to turn on the child safety lock. Once
the child safety lock is enabled, RoboVac will not respond if any button is pressed to
protect children from accidentally getting hurt.
• To disable the child safety lock, press and hold the
• This function is also available in the EufyHome app.
Cleaning and Maintenance
Before cleaning and maintaining, turn off the device and unplug the adapter.
For optimal performance, follow the instructions below to clean and maintain RoboVac
regularly. The cleaning / replacement frequency will depend on your RoboVac usage
habits.
Recommended Cleaning / Replacement Frequency
RoboVac Part
Cleaning Frequency
Dust box and water tank
After each use
Once a week
Filter
(Twice a week if you have a
pet)
Side brushes
Once a month
Brush guard
Once a month
button for 3 seconds again.
Replacement Frequency
-
Every 6 months or after
every 50 rounds of cleaning
Every 3-6 months (or when
visibly worn)
Every 3-6 months (or when
visibly worn)
EN 25
Publicidad
