Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Problem
The motor runs,
but the chain
does not cut cor-
rectly, or the mo-
tor stops after
around 3 sec-
onds.
8
TECHNICAL DATA
Voltage
No load speed
Guide bar length
Chain stop
Chain oil capacity
Weight (without battery
pack)
Measured sound pres-
sure level
Guaranteed sound power
level
Vibration
Chain
Guide bar
Battery model
9
WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website )
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
Possible cause Solution
1. Release the
When you use
trigger.
the machine un-
der load, it
2. Start the ma-
stops.
chine again.
Lubricate the
The chain is not
chain to de-
lubricated.
crease the fric-
tion.
40V DC
8 m/s
203 mm
< 2 s
50 ml
3.9 kg
L
= 87.7 dB(A), K
pA
dB(A)
L
= 104 dB(A)
wA.d
2
< 2.5 m/s
, K = 1.5 m/s
91PJ033X/CL15033X/
91YOS-33E
080NDEA318/
M1500833-1318TL/
ES080SDEA318
G40B2/G40B25/G40B4/
G40B5/G40B6 and other
BAF series
English
10
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile
the technical file:
Name:
Address:
Herewith we declare that the product
Category:
Model:
Serial number:
= 3
pA
Year of Construc-
tion:
•
is in conformity with the relevant provisions of the
2
Machinery Directive 2006/42/EC.
•
is in conformity with the provisions of the following
other EC-Directives:
•
2014/30/EU
•
2000/14/EC & 2005/88/EC
•
2011/65/EU & (EU)2015/863
Furthermore, we declare that the following (parts/
clauses of) European harmonised standards have been
used:
•
EN 60745-1, EN ISO 11680-1, EN 55014-1, EN
55014-2, EN ISO 3744, ISO 11094, IEC 62321-3-1,
IEC 62321-4, IEC 62321-5, IEC 62321-6, IEC
62321-7-1, IEC 62321-7-2, IEC 62321-8
Measured sound
power level:
Guaranteed sound
power level:
Conformity assessment method to Annex V Directive
2000/14/EC.
The EC type-examination certificate
number:13SHN0023-01 issued byIntertek Deutschland
GmbH (Notified body 0905), Stangenstraβe 1, 70771
Leinfelden-Echterdingen.
8
GLOBGRO AB
Globe Group Europe
Riggaregatan 53, 211 13 Malmö,
Sweden
Micael Johansson
Riggaregatan 53, 211 13 Malmö,
Sweden
Polesaw
20157/1300607 (PSF301)
See product rating label
See product rating label
L
: 103 dB(A)
WA
L
: 104 dB(A)
WA.d
Publicidad
