Fanimation TRIAIRE SHOWROOM MAD8514 M Serie Manual Del Usuario página 11

How to Wire Your Ceiling Fan (Continued)
3.
Connect wires using connectors as shown in
Figure 4.
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
BLACK
L
WHITE
N
RED
AC L1
POWER
4. After connections have been made, put the white
and green leads to one side and the black leads
towards the other side, the connection should be
turned upward and carefully push leads into the outlet
box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the
ungrounded conductor on the other side. (Figure 5)
The blades must be installed first before programming
is performed.
WARNING
HANGER
BRACKET
HANGER
BALL
RECEIVER
RF ANTENNA
WARNING
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
RECEIVER HARDWARE USED:
Wire Connectors
BLUE
BROWN
GROUND
Figure 4
Green Wire from Supply
(Ground)
Green Wire from
Hanger Bracket
(Ground)
Green Wire
from Receiver (2)
(Ground)
Green Wire
from Hanger
Ball (Ground)
11
X 9
RED
GRAY
YELLOW
DC MOTOR
WHITE
LIGHT KIT
White Wire
Listed Outlet Box
from Supply
Black Wire
from Supply
White Wire
from Receiver
Red Wire
from Supply
Receiver
Black Wire
from Receiver
Figure 5
BLUE
Household
Supply