Altrad Belle RTX 50 Manual Del Operador página 29

GB
NOTICE: The optimum maximum engine revolution has been set at the factory as follows:
Model Engine
RTX 74
DO NOT alter this setting since irregular vibration or damage to the gear transmission mechanism can
CAUTION
result, and both engine and machine warranties will be automatically voided.
Lifting
Where it is necessary to use lifting equipemnt to position the RTX
handle are not damaged or cracked. If they are damaged or cracked, replace the rubber mounts before attempting to lift the machine.
NEVER leave the engine running whilst transporting or moving the RTX's, even if it is only a short distance.
Once the checks listed in the 'Pre-Start' section have been carried out, you may start the engine.
The Altrad Belle RTX
mechanism. As the engine speed is increased the clutch will engage and the engine will drive the crank mechanism.
CAUTION
will be damaged, and the life of the machine will be greatly reduced.
into the materials being compacted. Excessive pressure on the operating handle will lead to unsatisfactory compaction due to
the fact that the jumping action is reduced.
Transportation.
When transporting or storing the machine, place the machine in an upright position if at all possible. Should the machine be required
to be laid down, NEVER attempt to transport the machine in a manner that the air cleaner faces downwards. Otherwise, the oil in the
cooled.
lift the lower part of the machine, and pull the machine out.
Operation at High Altitude
allow for correct fueling of the engine. Otherwise, the unit will suffer from a lack of engine power and not work correctly
Start & Stop Procedure
Optimum
Operation
ONLY to the lifting point on top of the RTX's operating handle.
29
Maximum RPM
Upper Limit
RTX's
(Petrol Only)