SOMFY Tilt Only 50 WF RTS Central Manual página 23

EN
Tilt Only 50 WF RTS Central
Briefly press the PROG button on the RTS control point (B) to be added or
deleted: the motorised product moves up and down, the green LED flashes five
times and the RTS control point is programmed into or deleted from the drive.
2.4.6. Deleting all control points from the drive memory
To delete all control points programmed, press
and hold the PROG button on the drive until the
motorised product moves up and down twice.
All control points are deleted.The green LED
flashes five times.
x2
2.4.7. Deleting the drive memory
To reinitialise the drive, press and hold the PROG
button on the drive until the motorised product
moves up and down three times.
All the settings are erased. The green LED flashes
fives times then the orange LED comes on.
x3
Copyright 2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved. 23
©