Publicidad
Idiomas disponibles
Idiomas disponibles
•
Remove the grass.
10.6
CUTTING TIPS
•
Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
•
Move the machine from right to left to prevent thrown
debris from hitting the operator.
•
Do not cut in the danger area.
•
Do not force the trimmer head into uncut grass.
•
Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood can
wear the cutting line quickly.
DANGER
AREA
10.7
CHANGE TO THE EDGING MODE
The machine can be used in combination with the edge
guide for edging sidewalks and walkways.
1. Stop the machine and flip down the edge guide (2) from
stored position.
DIRECTION OF
ROTATION
BEST CUTTING AREA
NOTE
English
2. Pull the edging coupler (1) and turn the trimmer head 180
degrees until the trimmer head locks into position.
3. Release the edging coupler.
10.8
ADJUST THE LENGTH OF THE
SHAFT
You can adjust the length of the shaft to operate the
machine easily.
1. Stop the machine.
9
2
1
NOTE
EN
Publicidad
