STERWINS 20VGSS2-2IN1.1 Instrucciones De Montaje página 209

FR C) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
ES
Carrying power tools with your finger on
the switch or energising power tools that
have the switch on invites accidents.
D) Remove any adjusting key or wrench
PT
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
IT
E) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
EL
2.5 POWER TOOL USE AND CARE
A) Do not force the power tool. Use the
correct power tool for your application. The
PL
correct power tool will do the job better and
safer at the rate for which it was designed.
B) Do not use the power tool if the switch
RU
does not turn it on and off. Any power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
C) Disconnect the plug from the power
KZ
source and/or the battery pack from the
power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the
UA
risk of starting the power tool accidentally.
D) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
RO
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
EN
2.6 BATTERYTOOL USE AND CARE
A) Recharge only with the charger
specified by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk offire when
used with another battery pack.
B) Use power tools only with
specifically designated battery packs.
Use of any other battery packs may
create a risk of injury and fire.
F) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
G) If devices are provided for the
connection of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of dust collection
can reduce dustrelated hazards.
H) Do not let familiarity gained from
frequent use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause
severe injury within a fraction of a second.
E) Maintain power tools and accessories.
Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tools
operation. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained powertools.
F) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
G) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
H) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces
do not allow for safe handling and control
of the tool in unexpected situations.
C) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
208