STERWINS 20VGSS2-2IN1.1 Instrucciones De Montaje página 217

1. Handle
FR
2. Safety lock-off button
3. Motor housing
4. ON/OFF trigger
ES
• Wear gloves when unboxing.
• Do not use cutter, knife, saw or any
other similar tool for unboxing.
PT
• Carry the tool only by the handle 1
4.2 INSTALLATION
IT
Blade attachment: illustration 2.1
To install: Press two fasteners, then align and match the shaft with the shaft hole. The
attachment will be locked in place after releasing two fasteners.
EL
To remove: Unlock the engagement by Pressing two fasteners. Dismantle the blade attachment
from tool.
Battery pack: illustration 2.2 to 2.3
PL
WARNING: Make sure the battery pack is locked in docking port before operation. Failure
to firmly seat the battery pack could cause the battery pack to fall out, resulting in serious
personal injury.
To install : Align and slide battery pack to battery docking port until it locks in place.
RU
To remove : Press the battery unlock button and slide the battery pack out of docking port.
4.3 FIRST USE
KZ
UA
RO
EN Pay particular attention using the machine for the first time : focus and dedicate all your attention
to this first use. Make the first trial on a free space with no obstacle and no surrounding element
4.4 OPERATION
Switching on/off: illustration 4.1
TO turn the tool ON, push and hold the safety lock-off button with your thumb, then pull the ON/
OFF trigger with your forefinger. Once the tool starts, you can release the safety lock-off button
and proceed with operation.
NOTE : The safety lock-off button reduces the risk of accidental starting.
To turn the tool OFF, release the ON/OFF trigger.
WARNING ! READ THE « SAFETY INSTRUCTION » SECTION AT THE
BEGINNING OF THIS MANUAL INCLUDING ALL TEXT UNDER
SUBHEADING THEREIN BEFORE USING THIS PRODUCT.
THE BATTERY IS NOT FULLY CHARGED AT THE TIME OF PURCHASE.
WARNING : ENSURE THE BLADE DOES NOT TOUCH ANY OBJECTS
BEFORE TURNING ON THE PRODUCT.
5. Grass shear blade attachment
6. Grass shear blade sheath
7. Hedge trimmer blade attachment
8. Hedge trimmer blade sheath
• Keep the box for further reuse
(transport and storage).
• Keep instruction manual in a dry
area for further consultation.
216