Publicidad
Idiomas disponibles
Idiomas disponibles
This product is designed for hand use, this product should never be installed on a workbench
orany other support.
CAUTION : DO NOT FORCE THE BLADES THROUGH DENSE GROWTH.
IF THE BLADES SLOW DOWN, THEN REDUCE YOUR CUTTING PACE.
SHOULD THE BLADES JAM, RELEASE THE TRIGGER IMMEDIATELY.
DO NOT USE YOUR FINGERS TO FREE UP JAMMED BLADES. JAMMED BLADES
CAN RELEASE SUDDENLY CAUSING SERIOUS INJURY. NEVER TOUCH THE
BLADE RAIL WHILE IN OPERATION AND BE AWARE OF SHARP EDGES EVEN
WHEN THE BATTERY GRASS SHEAR IS NOT IN USE.
Always ensure you are securely balanced with a free work area before switching on the grass
shear.
Operation safety warnings :
• Check the product as well as accessories
for damage before each use. Do not use the
product if it is damaged or shows wear.
• Double check that the accessories
and attachments are properly fixed.
• Always hold the product on its handle.
Keep the handle dry to ensure safe support.
• Ensure that the air vents are always
unobstructed and clear. Clean them if
necessary with a soft brush. Blocked
air vents may lead to overheating
and damage the product.
• Switch the product off immediately
if you are disturbed while working by
other people entering the working
area. Always let the product come to
complete stop before putting it down.
• Do not overwork yourself. Take regular
breaks to ensure you can concentrate on the
work and have full control over the product.
• Before switching the product on, check
whether it has been assembled correctly and
all the moving parts are running smoothly.
• We recommend slightly dampening
surfaces in dusty conditions or
using a moist attachment.
• Operate the product only at reasonable
hours – not early in the morning or late at
night when people might be disturbed.
• Avoid using the product in bad weather
conditions, especially when there is a risk of
lightning. Do not operate the product in poor
lighting. The operator requires a clear view of
the work area to identify potential hazards.
• Operating similar tools nearby
increases both the risk of hearing
injury and the potential for other
persons to enter your work area.
• Keep firm footing and balance.
• Do not overreach. Overreaching
can result in loss of balance. Always
be sure of the footing on slopes.
• Walk, never run. Keep all parts of your
body away from any moving part.
• Never run the product without the
proper equipment attached.
• Do not modify the product in any way
or use parts and accessories that are not
recommended by the manufacturer.
• Do not to touch moving hazardous parts
before the machine is disconnected from
the mains and the moving hazardous
parts have come to a complete stop
217
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Publicidad
