Descargar Imprimir esta página

Kärcher HDS 2000 Super Manual De Instrucciones página 22

Ocultar thumbs Ver también para HDS 2000 Super:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
HDS 2000 Super
GB
5.1 Venting the appliance
• • • • •
Open the water intake.
• • • • •
Allow the appliance to run without the high-
pressure hose until the water emerges without
bubbles.
• • • • •
Then connect the high-pressure hose.
• • • • •
If the spray lance and high-pressure nozzle
have already been fitted to the high-pressure
hose, you can vent the appliance as follows:
With the hand-held spray gun open, switch
the appliance on and off several times at
intervals of 10 seconds until the water emerges
from the high-pressure hose without bubbles.
5.2 High-pressure nozzle
• • • • •
The effectiveness of the high-pressure jet
depends to a great extent on the spray angle.
A 25° fan jet nozzle is usually employed
(included in standard delivery).
• • • • •
Other nozzles are available as accessories.
0° full jet nozzle
for stubborn dirt.
40° fan jet nozzle
for sensitive surfaces.
Dirt blaster
for thick layers of dirt.
Variable angle nozzle
with adjustable spray angle
• • • • •
At first always direct the high-pressure jet
from a greater distance at the object which is
to be cleaned, thereby preventing damage
from excessive pressure.
22
All manuals and user guides at all-guides.com
5. Operation
5.3 Adjusting the Operating Pressure
and Flow Rate
With the servo pressure valve on the hand spray
gun
– Adjust operating pressure and flow rate
(+/–) by rotating the pressure/flow control
(infinitely variable).
The two pumps are switched in and out via
pressure switches depending on the demand for
water.
5.4 Operating with cold water
• • • • •
Switch the appliance switch to "
5.5 Operating with hot water
• • • • •
Set the thermostat to the desired temperature.
• • • • •
We recommend the following cleaning
temperatures:
30–50 °C for light dirt
max. 60 °C for dirt which contains protein,
e.g. in the food industry
60–90 °C for cleaning vehicles, machines
• • • • •
Switch the appliance switch to "
• • • • •
If you also increase the operating pressure
and flow rate, you also change the water
temperature.
".
".

Publicidad

loading