Publicidad
Step 25
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D133 and D139).
å
Fasten a DRAWER RIGHT (40CC) to the RIGHT DRAWER SIDE (D133)
å
and a DRAWER LEFT (40CD) to the LEFT DRAWER SIDE (D139). Use four
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Fasten one PULL (189K) to the DRAWER FRONT (K). Use two BLACK
å
9/16" LARGE HEAD SCREWS (1S).
Repeat this step for the other DRAWER.
å
3
4
BLACK 9/16" LARGE HEAD SCREW
(4 used for the PULLS)
www.sauder.com/service
Roller end
1
2
K
189K
1S
GOLD 5/16" FLAT HEAD SCREW
(8 used for the SLIDES)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D139
D133
4
3S
426484
5
10A
Roller end
1
2
3
Drawer Slide
Center the screw in the oval hole.
Page 31
Publicidad
