Publicidad
Step 27
Insert a SLIDE CAM (10A) into the FILE DRAWER SIDES (D429 and D430).
å
Fasten the EXTENSION SLIDES (40MC) to the FILE DRAWER SIDES (D429 and D430).
å
Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten one PULL (189K) to the FILE DRAWER FRONT (J). Use two
å
BLACK 9/16" LARGE HEAD SCREWS (1S).
Repeat this step for the other FILE DRAWER.
å
3
4
BLACK 9/16" LARGE HEAD SCREW
(4 used for the PULLS)
www.sauder.com/service
Open end
1
2
J
189K
1S
GOLD 5/16" FLAT HEAD SCREW
(8 used for the SLIDES)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D429
D430
3S
426484
10A
2
3
4
Drawer Slide
Center the screw in the oval hole.
7
Open end
1
Page 33
Publicidad
