Publicidad
Step 32
To make adjustments to the FILE DRAWER loosen SCREW #4 in
å
the SLIDES a 1/4 turn, then turn the cam clockwise or counter-
clockwise. Notice how the drawer raises or lowers as you turn the
cam. By adjusting the drawer this way, it will help the DRAWER
FRONT line up better when closed. Tighten the SCREWS when
fi nished with adjustments.
If needed, repeat this step for the middle DRAWER.
å
Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #4.
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
Page 38
Cam
426484
13
www.sauder.com/service
Publicidad
