Emerson AVENTICS 652 Instrucciones De Montaje página 30

11.4 Settings for the Ethernet variant
The settings apply to all variants of the product with Ethernet electrical connec-
tion.
Ethernet
Objective Submenu
Assign a static or dynamic ad- DHCP Mode
dress
Set the IP address IP Address
SubNetMask SubNetMask
Gateway Gateway
Name Name
Screen 1.1
(Kg/h) Display 1 Top
(m/s) Display 1 Btm (m/s)
Screen 1.2
(m³) Display 2 Top
(m³/h) Display 2 Btm
Screen 1.3
(kg) Display 3 Top
(kWh) Display 3 Btm
Hold for menu
Ethernet DHCP Mode
IP Address
SubNetMask
Gateway
Name
Fig. 22
Web server
Objective Submenu
Switch the web interface on State
and off
Set the port Port
Reset the user-defined pass- ResetPW
word
Webserver State
Port
ResetPW
Fig. 23
OPC UA
Objective Submenu
Switch the web interface on State
and off
Set the port Port
Set the user name User
Assign a password Password
AVENTICS™ 652/653 | 549411-001-AB | English
Option
Assign an address
Set the IP address
Set the subnet mask
Set the gateway address
Set the DHCP name
Screen 2.1 Events Status Signal
60 min
Screen 2.2 Info
24h Signal Quality
Screen 2.3 Info
7days Serial No.
Firmware
Static IP
DHPC Client
abort store
### ### ### ###
abort store
### ### ### ###
abort store
### ### ### ###
abort store
### ### ### ###
abort store
Option
Select between Active and In-
active
Select the web server port.
The default port for the HTTP
service is port 80
Reset the web server pass-
word for the "Maintenance"
user to factory default. The
default password (factory set-
ting) is "airflowsensor"
Active
Inactive
abort store
#####
abort store
(action required)
abort store
Option
Select between Active and In-
active
Set the port
Set the user name
Set the password
OPC UA State
Port
User
Password
Fig. 24
MQTT
Objective Submenu
Switch the web interface on State
and off
Broker Broker
Set the port Port
Topic Topic
User User
Create the broker password Password
Send the update interval to Update
the broker
QoS QoS
Define MQTT message to the Send
broker
MQTT State
Broker
Port
Topic
User
Password
Update
QoS
Fig. 25
Active
Inactive
abort store
#####
abort store
# ... #
abort store
# ... #
abort store
Option
Select between Active and In-
active
Set the broker
Set the port
View the topics
Enter a user name for the bro-
ker
Enter the broker password
Set the update interval
Select QoS-0, QoS-1, or QoS-2
Select a menu item from the
second submenu and set to
Active or Inactive
Active
Inactive
abort store
### ### ### ###
abort store
#####
abort store
######/#/####
abort store
######
abort store
######
abort store
##### ms
abort store
QoS0
QoS1
QoS2
abort store
30