Descargar Imprimir esta página

Johnson DYNAMO74 Manual De Instrucciones página 29

Publicidad

Idiomas disponibles

Idiomas disponibles

Light Display Status
Blue, green and red flashing alternately
Blue light glowing
Blue light flashing
Green light glowing
Green light flashing
Red light glowing
Red light flashing One fast, one slow
Function
Emergency
During normal charging, press once
stop
On standby statue:
Under APP control mode, press 5 times continously to
enter plug and charge mode;
Mode
Note: plug and charge mode: automatically confirmed
toggle
charging after the connection is confirmed.
On standby statue, press and hold for more than 10
seconds to reset the WiFi, then re-add the device for
Wifi reset
pairing connection
This product complies with the OCPP1.6J service protocol. After you set the IP and ID by the APP and the
network cable is connected to the Ethernet interface, the product will automatically connect to the server to
realize backstage control. To set the IP and ID,please refer go to the settings in the APP;
Power management instruction
Product with power management function can self-regulate the output current to keep the total household
electricity load not exceeding the total household current.
Note: If the current values of the three live wires monitored by the three-phase power are not equal, the product
will calculate the minimum output current by itself, and the three output lines will be executed according to this
minimum output current;
After the product is connected to WIFI, set the total allowable current value of the household through the APP.
For detailed settings, please refer to "Order input".
USER INSTRUCTIONS
INDICATOR LIGHT
FUNCTION INSTRUCTION
Function button operation instructions
Operation
Telecommunication
Product Status
Product power-on self-check
Standby
Connection confirmation
Charging
disconnect charging from APP or OCPP
Over temperature
Emergency stop
Status indicators
Red light flashing
One fast, one slow
Beep twice
Beep twice
6
Remark
Un-plug the connector
If you want to cancel
the plug and charge
mode, click schedule
in the APP
The charger will need
to be readded to the
APP
V.1

Publicidad

loading