Device Use and Care
The AccelStim device should be handled with care. Follow these instructions to ensure
optimal and safe operation of the device.
•
The AccelStim device is for single patient use.
•
Inspect the device prior to each use for wear, deterioration or damage.
•
The use of accessories other than those specified and provided may result in
increased emissions or decreased immunity of the device.
•
Dropping or mishandling the AccelStim device may damage the device and it
may stop working.
•
The patient is the intended operator of this device; for safety purposes all
instructions should be followed when using the AccelStim device.
•
Use of the AccelStim device in any manner other than intended could have
harmful effects and/or void the warranty.
•
If any parts of the AccelStim device or accessories are damaged, do not use the
AccelStim device. Please contact Patient Services at 1-800-535-4492.
•
Do not attempt to modify, disassemble or repair the AccelStim device. There are
no user serviceable parts inside.
•
Check the integrity of the transducer before each treatment session. If it is
damaged, contact Patient Services at 1-800-535-4492 for a replacement.
•
Do not expose the AccelStim device or its lithium-ion battery to heat sources or
throw into a fire due to risk of malfunction or explosion.
•
Do not use the device or its applied parts (transducer) near breathing systems or
other devices that use concentrated oxygen.
•
Do not handle any of the system components with wet hands, especially when
connecting the power supply.
•
Do not dip or splash any of the system's components with water or any other
type of liquid. In the event of the accidental immersion of the AccelStim device in
liquids, it must no longer be used. Contact Patient Services at 1-800-535-4492
if any of these occur.
•
The AccelStim device is designed to alert the user of any problems by means of
visual and audio messages. When possible, restore the normal condition and
restart the treatment as described within the Troubleshooting the AccelStim
device section of this user manual on page 20.
•
Do not connect any part of the unit to other equipment or devices.
•
Do not connect the AccelStim device to any part not intended for use and not
supplied by the manufacturer.
•
Attention: connecting cables could cause a strangulation hazard if incorrectly used.
•
Do not put any part of the medical device into mouth in order to avoid risk of
suffocation.
•
Do not cover the device during charging or use.
•
Avoid placing the control unit against the skin/body while charging the battery
as the unit may become hot.
•
The user must never make any repairs on the system.
•
In case of failure, the user should contact Patient Services at 1-800-535-4492.
•
Device Interference: Electromagnetic interference, such as active cellular phones,
radio-frequency identification (RFID) readers, electronic security systems (e.g.,
metal detectors, electronic article surveillance), near-field communications
(NFC) systems, wireless power transfer and unique medical emitters such as
electrocautery, electrosurgical units, and diathermy equipment can interfere
16